MOVINS — EDIFACT Stowage Instruction Message (D.13B)

The MOVINS message conveys container loading and discharge instructions sent by a carrier to a port terminal: which containers to load, discharge or re-stow on which vessel, at which position and under which constraints. This page summarises the segment structure as published by UN/CEFACT for directory D.13B.

Purpose

The MOVINS message conveys container loading and discharge instructions sent by a carrier to a port terminal: which containers to load, discharge or re-stow on which vessel, at which position and under which constraints.

This page focuses on the structure published by UN/CEFACT for directory D.13B. The segments listed, their status (M / C), position and repetition factor are extracted from the official file movins_c.htm hosted on service.unece.org.

Segment structure

The MOVINS D.13B message has 45 header entries, 0 detail entries and 0 summary entries (segments and groups combined). Groups are shown in bold and their members are indented by actual nesting depth.

Header

Detail

No segment in this section.

Summary

No segment in this section.

Changes vs D.96A

Top-level differences between D.96A and D.13B for the MOVINS message (segments directly inside header / detail / summary, ignoring nested groups). The comparison is indicative: a given tag may have evolved inside nested groups without showing up in this synthesis.

Segments added vs D.96A

• CTA in the header section (status M, repeat ×1) — not present at the top of the corresponding D.96A section.
• COM in the header section (status C, repeat ×9) — not present at the top of the corresponding D.96A section.

Status changes (M ↔ C)

• NAD (header): status C in D.96A → M in D.13B.

Max-repeat changes

• NAD (header): repeat ×3 in D.96A → ×1 in D.13B.

Structural example

Minimal example of an MOVINS D.13B message with mandatory segments only. The goal is to show the exact version declared in UNH (MOVINS:D:13B:UN) — not to replicate a full business case (see the MOVINS D.96A page for an annotated example).

UNB+UNOC:3+5410000000123:14+5410000000456:14+260514:1430+CTRL013001'
UNH+1+MOVINS:D:13B:UN'
BGM+244+MOVINS-2026-0188+9'
DTM+137:202605141430:203'
TDT+20+MSC1234W+1++MSC::ZZZ+++9301234:103:::MSC OSCAR'
LOC+11+FRLEH::6'
LOC+13+NLRTM::6'
EQD+CN+MSCU1234567+45G1+++5'
HAN+L'
LOC+147+0010186::ZZZ'
UNT+9+1'
UNZ+1+CTRL013001'

Common errors

• Misaligned UNH tokens — The UNH+...+MOVINS:D:13B:UN token must reflect exactly the directory in use — a mismatch between the UNH release and the release agreed with the partner is rejected by every strict validator.
• Wrong UNT segment count — The value after UNT+ must include UNH and UNT themselves. By far the most common sender-side error, regardless of the directory in use.
• Stale code lists — Between D.96A and D.13B, several code lists received new qualifiers (DTM status, RFF qualifier, NAD codes…). Reusing an older directory’s code tables triggers warnings or even rejections depending on the partner’s strict-conformance mode.

Related messages

Other versions of this message available on ediverse.io: MOVINS D.96A, MOVINS D.01B, MOVINS D.10A, MOVINS D.16B, MOVINS D.21B, MOVINS D.24A, MOVINS D.97A, MOVINS D.99B, MOVINS D.00B, MOVINS D.02B, MOVINS D.05A, MOVINS D.08A, MOVINS D.18B, MOVINS D.20B.

← All EDIFACT versions